JACK PIPE BENDING MACHINE TO COLD-BEND GAS PIPES WITHOUT
FILLING.
The implement is equipped with 5 formers for pipes of 1/4 - 3/8 - 1/2 - 3/4 - 1"
and with a sturdy jack.
The ATLAS implement may be applied to a vice, as per fig. A, or to the Pionier
bench for plumbers, as per fig. B
The pipe bending machines RAPID T10 with sliding top plate and constant
reading lower plate cold-bend Gas and water pipes, without welding, of medium
thickness from 3/8 to 6".
The motor-driven pipe bending machines "RAPID T10/M" fitted with silent
electrohydraulic gearbox, remote-controlled by a two-way distributor, are practical
indeed for the special accuracy with which they have been designed.
The gearbox with radiant pistons is complete with a limit valve that enables an
automatic oil discharge once the maximum stress has been reached, keeping
the working pressure inalterated.
Each one of these models is also fitted with a sturdy two-storey working table.
The hydraulic gearbox is placed on the lower storey, while the
pipe-bending machine is placed on the upper storey.
The absolute newness of the "Rapid T10/M" is represented by
the fact that they can be used also by hand if needed.
The same are suitable to bend gas and water pipes without
welding, of medium thickness from 3/8” up to 6”.
ASSURICH INDUSTRIES PTE LTD
76 Tagore Lane Singapore 787499
Tel : 6459 1069 Fax : 6457 1053
Email : sales@assurich.com
