Brand:

Goyen Mecair Filter Failure Detector

Brand:
Model: FFD

The main purpose of Goyen | Mecair FFD is to detect significant increases in particulate concentration likely to be related with a broken bag in the filter or other major failures. Thanks to the 4-20 mA output it also acts as an integrated unit to deliver dependable and pragmatic filter monitoring.

The FFD utilizes a unique probe electrification technology which provides much better performances than conventional DC triboelectric systems as well as alternative AC systems. This allows extending the velocity range over which the system has no cross sensitivity to changing velocity. Thanks to that technology, the FFD is also unaffected by build-up of particulate on the sensing rod, thus eliminating signal drift concerns.

Add to wishlist
Description

A charge signature is induced by particulates in the airstream interacting with the sensing rod. The FFD extracts a specific frequency band from the induced AC current signature and filter out the DC current generated by direct particle collisions. In order to reject signals falling outside a pre-defined frequency range, the so resulting signal is electronically filtered. Thanks to that, Goyen | Mecair filter failure detectors are less susceptible to changes in particle velocity and are not affected by any particulate contamination on the sensing rod.

  • Suitable for a wide range of dust collectors designs and configurations
  • Dust level response: <1mg/m3 to 500mg/ m3 (<0.028 mg/ft3 to 14 mg/ft3)
  • Flue gas velocity from 4m/sec
  • Flue gas temperature up to 200°C (390°F)
  • Ambient temperature from -20°C to +50°C (-4°F to +120°F)
  • Duct sizes from 0.5m
  • Hazardous area ATEX II 3GD

Product Details
FFD

Data sheet

Model
FFD
20 other products in the same category:
Goyen
The Goyen | Mecair FFA provides you dependable and pragmatic filter monitoring through an easy setup external unit and clear, simple and language independent full-color LCD display. It features two alarm relays and a...
Goyen
Goyen Mecair flanged valves for reverse pulse jet systems in dust collectors are manufactured from die cast aluminum. The high-performance diaphragm valves with a flanged inlet port and a slide seal outlet port allow...
Mecair
Mecair produces a complete series of air cannons to dislodge all types of dust which stick to the walls of the hoppers and the bottom of the silos. These devices are more efficient than “fluidification” and...
Mecair
The patented Mecair “Full Immersion” System consists of a round header tank with fully integrated diaphragm valves, suitable for dust collector filter applications, in particular for reverse pulse-jet filter cleaning...
Mecair
The 1.5” port Mecair Full Immersion 512G and 514G Series technologies are high-performance filter cleaning systems delivering high filter cleaning flow rates and precise control of air consumption through the use of a...
Goyen
12” diameter filter cleaning system manifold complete with 3” port CPV valves. Used in the reverse pulse cleaning of particulate filter elements. Suited to very narrow filter arrangements.
Goyen
Particles in emission outlet streams of various manufacturing processes need to be measured to meet health, safety and environmental regulations. The Goyen Mecair range of Particulate Emission Probes such as the FFD,...
Mecair
The 400 Series valves are suitable for lowpressure systems (0.5–1.5 bar), and highpressure systems (0.5–7.5 bar). The Series 400 is a range of diaphragm valves suitable for dust collector applications, in particular...
Goyen
The Duro Sequencer is an economical and durable filter cleaning control solution, for smaller collectors. The Duro Sequencer features a robust solid state construction for excellent reliability and is designed for...
Goyen
The ECS Control System is an intelligent controller developed to provide flexible solutions for economical filter life by minimising the costs associated with maintaining and operating modern dust filtration systems....
Mecair
The patented Mecair “Full Immersion System” range, now includes the new Mini-Full designed for direct pneumatic injection into the filtering elements. The new ½” Full Immersion valve has been designed for installation...
Goyen
Goyen T Series are allround series of high-performance threaded valves for reverse pulse jet systems in dust collectors. They are used around the world to frequently clean the filters in systems aiming to control the...
Goyen
Goyen solenoid pilot valves are specifically designed for the reverse pulse jet filter cleaning of dust collectors and baghouses. These include all variations of bag filters, cartridge filters, envelope filters,...
Goyen
The Goyen blowtube nozzles and cartridge cleaning cones ensure effective filter cleaning with reverse pulse jet air. The product ranges offer extensive connectivity options and high efficiency through balancing air...
Goyen
Goyen produces a range of aluminium diecast bulkhead connectors designed to ease the installation of cleaning systems onto dust collectors. These components eliminate the requirement for welding and allow easy removal...
Mecair
The 300 Series is a range of diaphragm valves suitable for dust collector applications, in particular for reverse pulse jet filter cleaning of filter bags, cartridges, envelope filters, ceramic filters and sintered...
Mecair
Mecair manufactures a wide range of tanks for the pulse-jet dust collector filters, complying with the following European Directive: 97/23/CE (PED). Mecair also manufactures pressure vessels in accordance with the...

Menu

Settings

Share

Create a free account to use wishlists.

Sign in