Brand:

Torsionally Rigid Coupling ZAPEX ZN Gear Coupling

Brand:
Model: ZAPEX ZN

ZAPEX ZN® couplings connect machine shafts and compensate for angular and radial misalignment. ZAPEX gear couplings from the ZN series are made of high-quality quenched and tempered steel and are manufactured according to the modular construction system.

Add to wishlist
Description
  • Double-jointed gear coupling
  • Nominal torque range from TKN = 1,020 Nm up to 162,500 Nm with 12 sizes
  • Temperature range: from –20 °C to +80 °C
  • Long service life and minimal maintenance requirements as a result of reliable grease lubrication of the gear teeth
  • Small dimensions, low weight and low mass moments of inertia are achieved by means of an intelligent design and combination of materials
  • Large safety reserves even at high shock loads
  • Maximum operational reliability through optimal tooth shape and use of high-quality materials
  • Suitable for horizontal mounting and, with a special design, for vertical mounting
  • Suitable for use in potentially explosive environments; certified according to 2014/34/EU (ATEX)
Product Details
ZAPEX ZN

Data sheet

Model
ZAPEX ZN
17 other products in the same category:
Flender
​RUPEX® couplings are used as flexible compensating couplings in all applications requiring a reliable transmission of torque under harsh operating conditions. The conical seats of the buffer pins facilitate mounting...
Flender
Grease-lubricated FLENDER ZBG® gear couplings make the best-possible contribution to safeguarding the maximum availability of your rail vehicle. Millions of kilometers of track, icy Siberian temperatures, extreme...
Flender
Fluid couplings operate according to the Föttinger principle. The coupling parts on the input and output side are not mechanically connected and are therefore wear-free. The torque is transmitted by the fluid movement...
Flender
Due to their torsional flexibility, N-EUPEX® couplings can move critical torsional vibrations away from the operating area of mechanical equipment in such a way that no negative effects on the drive train are to be...
Flender
N-EUPEX DS® couplings do not have a fail-safe device, allowing positive disconnection of the input and output side upon failure of the flexible elements due to overload or wear. Then, the metal parts of the DS...
Flender
FLENDER MBG® membrane couplings are two-part, torsionally rigid all-steel couplings with excellent concentricity and outstanding balance quality because they are balanced together with the motor rotor. The...
Flender
N-BIPEX allows greater freedom when designing the cam geometry, thereby laying the foundation for the innovative curved design. Unlike the milled cams typically available on the market, this design results in uniform...
Flender
FLENDER LBK® connecting rod couplings have a split spacer and can be connected to the gear unit ultra-compactly. Radially arranged rubber elements create two hinge joints, which also make it possible to replace the...
Flender
FLENDER GKG® cardan couplings are elastic, double-jointed output couplings used to compensate for primary suspension misalignments in the bogie with full torque transmission between the gear unit and the powered wheel...

Menu

Settings

Share

Create a free account to use wishlists.

Sign in