Brand:

Torsionally Rigid Coupling N-ARPEX All-Steel Coupling

Brand:
Model: N-ARPEX

With the introduction of the new N-ARPEX® all-steel multi-disk coupling Flender is continuing the success story of the proven ARPEX® series of couplings. The N-ARPEX is currently the most powerful coupling on the market due to the consistent further development of the ARPEX – a leap in performance that in this size could only be achieved by means of various design features. With the N-ARPEX, Flender delivers the optimum price-performance ratio.

Add to wishlist
Description
  • Backlash-free, torsionally rigid all-steel multi-disk coupling
  • Nominal torque range from TKN = 350 Nm to 2,000,000 Nm
  • Temperature range: from –50 °C to +280 °C
  • Lower costs through higher performance
  • Low bearing loads through low weight
  • Versatility for maximum fitness for use
  • Easy selection and reduction in storage costs
Product Details
N-ARPEX

Data sheet

Model
N-ARPEX
17 other products in the same category:
Flender
Due to their torsional flexibility, N-EUPEX® couplings can move critical torsional vibrations away from the operating area of mechanical equipment in such a way that no negative effects on the drive train are to be...
Flender
Grease-lubricated FLENDER ZBG® gear couplings make the best-possible contribution to safeguarding the maximum availability of your rail vehicle. Millions of kilometers of track, icy Siberian temperatures, extreme...
Flender
N-EUPEX DS® couplings do not have a fail-safe device, allowing positive disconnection of the input and output side upon failure of the flexible elements due to overload or wear. Then, the metal parts of the DS...
Flender
​RUPEX® couplings are used as flexible compensating couplings in all applications requiring a reliable transmission of torque under harsh operating conditions. The conical seats of the buffer pins facilitate mounting...
Flender
FLENDER GKG® cardan couplings are elastic, double-jointed output couplings used to compensate for primary suspension misalignments in the bogie with full torque transmission between the gear unit and the powered wheel...
Flender
FLENDER LBK® connecting rod couplings have a split spacer and can be connected to the gear unit ultra-compactly. Radially arranged rubber elements create two hinge joints, which also make it possible to replace the...
Flender
FLENDER MBG® membrane couplings are two-part, torsionally rigid all-steel couplings with excellent concentricity and outstanding balance quality because they are balanced together with the motor rotor. The...
Flender
Fluid couplings operate according to the Föttinger principle. The coupling parts on the input and output side are not mechanically connected and are therefore wear-free. The torque is transmitted by the fluid movement...
Flender
N-BIPEX allows greater freedom when designing the cam geometry, thereby laying the foundation for the innovative curved design. Unlike the milled cams typically available on the market, this design results in uniform...

Menu

Settings

Share

Create a free account to use wishlists.

Sign in