Brand:

Railway Coupling GKG Cardan Joint Coupling

Brand:
Model: GKG

FLENDER GKG® cardan couplings are elastic, double-jointed output couplings used to compensate for primary suspension misalignments in the bogie with full torque transmission between the gear unit and the powered wheel set shaft. They permit very large shaft displacements and allow major misalignments between the axle and the gear unit while generating only very slight reaction forces.

Add to wishlist
Description
  • Elastic, double-jointed cardan coupling
  • Nominal torque range up to TKN = 5,861 Nm with 5 sizes
  • Temperature range: from –30 °C to +70 °C
  • Long service life of up to one million kilometers of vehicle travel
  • Spherical rubber elements permit very large shaft displacements and allow major misalignments between the axle and the gear unit
  • Low reaction forces
Product Details
GKG

Data sheet

Model
GKG
17 other products in the same category:
Flender
N-BIPEX allows greater freedom when designing the cam geometry, thereby laying the foundation for the innovative curved design. Unlike the milled cams typically available on the market, this design results in uniform...
Flender
FLENDER LBK® connecting rod couplings have a split spacer and can be connected to the gear unit ultra-compactly. Radially arranged rubber elements create two hinge joints, which also make it possible to replace the...
Flender
FLENDER MBG® membrane couplings are two-part, torsionally rigid all-steel couplings with excellent concentricity and outstanding balance quality because they are balanced together with the motor rotor. The...
Flender
​RUPEX® couplings are used as flexible compensating couplings in all applications requiring a reliable transmission of torque under harsh operating conditions. The conical seats of the buffer pins facilitate mounting...
Flender
Due to their torsional flexibility, N-EUPEX® couplings can move critical torsional vibrations away from the operating area of mechanical equipment in such a way that no negative effects on the drive train are to be...
Flender
N-EUPEX DS® couplings do not have a fail-safe device, allowing positive disconnection of the input and output side upon failure of the flexible elements due to overload or wear. Then, the metal parts of the DS...
Flender
Fluid couplings operate according to the Föttinger principle. The coupling parts on the input and output side are not mechanically connected and are therefore wear-free. The torque is transmitted by the fluid movement...
Flender
Grease-lubricated FLENDER ZBG® gear couplings make the best-possible contribution to safeguarding the maximum availability of your rail vehicle. Millions of kilometers of track, icy Siberian temperatures, extreme...

Menu

Settings

Share

Create a free account to use wishlists.

Sign in