Railway Coupling MBG Membrane Coupling

Model: MBG

FLENDER MBG® membrane couplings are two-part, torsionally rigid all-steel couplings with excellent concentricity and outstanding balance quality because they are balanced together with the motor rotor. The concentricity and balance quality are permanently retained thanks to the optimum centering of the gear teeth on the two coupling halves.

Add to wishlist
  • Two-part, torsionally rigid all-steel coupling
  • Nominal torque range up to TKN = 9,500 Nm
  • Temperature range: from –50 °C to +280 °C
  • High concentricity
  • Excellent balance quality
  • Maintenance-free
  • Optionally available with an electrically insulating design
  • Optionally available with sliding hub and/or engine speed sensor toothing
  • Parts are 100% trackable
Product Details

Data sheet

17 other products in the same category:
Due to their torsional flexibility, N-EUPEX® couplings can move critical torsional vibrations away from the operating area of mechanical equipment in such a way that no negative effects on the drive train are to be...
FLENDER GKG® cardan couplings are elastic, double-jointed output couplings used to compensate for primary suspension misalignments in the bogie with full torque transmission between the gear unit and the powered wheel...
N-BIPEX allows greater freedom when designing the cam geometry, thereby laying the foundation for the innovative curved design. Unlike the milled cams typically available on the market, this design results in uniform...
N-EUPEX DS® couplings do not have a fail-safe device, allowing positive disconnection of the input and output side upon failure of the flexible elements due to overload or wear. Then, the metal parts of the DS...
Fluid couplings operate according to the Föttinger principle. The coupling parts on the input and output side are not mechanically connected and are therefore wear-free. The torque is transmitted by the fluid movement...
Grease-lubricated FLENDER ZBG® gear couplings make the best-possible contribution to safeguarding the maximum availability of your rail vehicle. Millions of kilometers of track, icy Siberian temperatures, extreme...
​RUPEX® couplings are used as flexible compensating couplings in all applications requiring a reliable transmission of torque under harsh operating conditions. The conical seats of the buffer pins facilitate mounting...
FLENDER LBK® connecting rod couplings have a split spacer and can be connected to the gear unit ultra-compactly. Radially arranged rubber elements create two hinge joints, which also make it possible to replace the...




Create a free account to use wishlists.

Sign in