Filter By
Filter By
AZ Spa
Four indexing locations on the head stock with the air operated index pins make it faster to dial in the crankshaft properly. Easily adjusted outboard counterweights never need to be supplemented by inboard weights....
AZ Spa
The CG270's are built very heavy with widely spaced ways to assure positive alignment of the wheel head to the table. Moreover, the controls are easier to use.
AZ Spa
Four indexing locations on the head stock with the air operated index pins make it faster to dial in the crankshaft properly. Easily adjusted outboard counterweights never need to be supplemented by inboard weights....
AZ Spa
One full stroke of this lever moves the wheehead precisely .0004”, and it can be used in steps to move the wheelhead .0001”, .0002”, or .0003”. The superior accuracy of this machine allows double plunge grinding...
AZ Spa
The CG machines are traditional machines suitable for the crankshafts rebuilding up to 6400 mm long. The table moves on bed with “V” and flat guide ways covered with antifriction treatment.
AZ Spa
The CG machines are traditional machines suitable for the crankshafts rebuilding up to 6400 mm long. The table moves on bed with “V” and flat guide ways covered with antifriction treatment.
AZ Spa
The CG machines are traditional machines suitable for the crankshafts rebuilding up to 6400 mm long. The table moves on bed with “V” and flat guide ways covered with antifriction treatment.
AZ Spa
CGA and CGX models move the grinding head on the base, this solution permit to reduce the overhall machine dimensions. The workpiece is clamped by headstock fixed on the base and tailstock moving on table support by...